How to Measure for Custom Round Table Chair Set Covers
Before you order your custom cover, you will need to carefully measure the table set it is meant to cover. Before measuring, arrange the chairs around your table how you plan to store them while covered. Our guide below will walk you through the steps to correctly and accurately measure your set to ensure you get the best fit.
Diameter
Measure side to side across top-center of the table top, from chair back to furthest opposite chair back.
*Measure each chair back to opposite chair back and record the longest side dimension.
*Measure each chair back to opposite chair back and record the longest side dimension.
Height
Measure from the ground to the top of the chair back.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
Please round up your dimensions to the nearest inch.
Additional Tips
For most secure fit of table chair set cover, arrange chairs at corners or slightly away from table before covering set.
To prevent cover from sagging in center of table chair set, place a large object under cover at table-center.
To provide the best fitting cover, we add 1" allowance along the diameter. An extra 2" allowance is added to the diameter if furniture dimension is greater than 150".