How to Measure Your Octogan Table/Chair Set
Before you order your custom cover, you will need to carefully measure the table set it is meant to cover. Before measuring, arrange the chairs around your table how you plan to store them while covered. Our guide below will walk you through the steps to correctly and accurately measure your set to ensure you get the best fit.
Long Width
Measure from across the center of the straight side of the table from chair back to the furthest opposite chair back.
Short Width
Measure the furthest point from left to right along the chair backs.
*If the arms protrude past the chair back, include that in your measurement.
*If the arms protrude past the chair back, include that in your measurement.
Depths
Measure across the center of the deepest side, adjacent to the width from chair back to chair back.
For the short depth, measure the widest point of the table's end or chair, whichever is widest.
For the short depth, measure the widest point of the table's end or chair, whichever is widest.
Height
Measure from the ground to the top of the chair back.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
Note: Please round up your dimensions to the nearest inch.