How to Measure for Custom Semi-Circle Sectional Covers
Before you order your custom size cover, you will need to carefully measure the curved sectional it is meant to cover. Our guide below will walk you through the steps to correctly and accurately measure your sectional to ensure you get the best fit. Please note that the left and right sides are from the perspective of when you are facing the sectional.
Width
Measure the curved width of the sectional from side to side.
*Run the measuring tape along the curve of the sectional keeping the tape is as straight as possible.
*Run the measuring tape along the curve of the sectional keeping the tape is as straight as possible.
Depth
Measure the sides adjacent to the width from the back to front of the sectional.
*If one side of your sectional is deeper than the other, use the deepest measurement.
*If one side of your sectional is deeper than the other, use the deepest measurement.
Diameter & Front Depth
Measure the inside diameter of your sectional from side to side. Measure the front depth from the base of your sectional out to the diameter line.
*Place a piece of tape on the diameter line to make measuring the front depth easier.
*Place a piece of tape on the diameter line to make measuring the front depth easier.
Heights
For back height, measure from the ground to the top of the sectional. Measure from the ground to the seat for front height. For front left height, measure from the ground to the top of the inside arm.
If your sectional is armless, the front left height measurement will be the same as the front height. We recommend a cover 1-2 inches shorter than the furniture for breathability. Please round up your dimensions to the nearest inch.
Additional Tips
To provide best fitting cover, we add 1" allowance along the width and 1" allowance along the depth of the cover. If the furniture width is 48" or greater, a 2" allowance is added.