How to Measure for Custom Rectangular Table Chair Set Covers
Before you order your custom cover, you will need to carefully measure the table set it is meant to cover. Before measuring, arrange the chairs around your table how you plan to store them while covered. Our guide below will walk you through the steps to correctly and accurately measure your set to ensure you get the best fit.
Width
Measure side to side across top-center of the table top, from chair back to furthest opposite chair back.
*Start measurement at the table top or leg base, whichever is the widest point.
*Start measurement at the table top or leg base, whichever is the widest point.
Depth
Measure side to side across top-center of the table top adjacent to the width from chair back to furthest opposite chair back.
*Start measurement at the table top or leg base, whichever is the deepest point.
*Start measurement at the table top or leg base, whichever is the deepest point.
Height
Measure from the ground to the top of the chair back.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
*We recommend a cover 1-2 inches shorter than the furniture for breathability.
Please round up your dimensions to the nearest inch.
Additional Tips
To provide the best fitting cover, we add 1" allowance along the width and depth. An extra 2" allowance is added to the width and depth if Furniture dimension is greater than 150".